BeBox (Thompson Speedtouch 780wl) and Supcom

[Deman]

Avoid this combo like the plague, it simply does not work.

[Deman]

Apparent Fix for Speedtouch 780wl, will test tonight!

In Windows

Go to Start, Run and type cmd
Then type telnet 192.168.1.254 and press Enter
Enter your username and password (by default username = Administrator with a capital A and password is blank)
Then type the following exactly as shown below and press Enter after typing the 0

:connection bind application=CONE(UDP) port=0

Then type

:saveall to save the config changes

Type exit to quit

Go to the modem web interface (internet explorer to http://192.168.1.254) and restart the router

Again when you have telnetted to the router (see above), type the following

:ids config state disabled -> Press Enter
:connection appconfig application=CONE(UDP) timeout=0 -> Press Enter
:saveall -> Press Enter

Go to the modem web interface and restart the router

[Deman]

By god this works!

[Bonkers]

could have told you this about 3 months ago *giggle*

[BugAlugs]

Mine works fine mind you i have the firewall and IDS turned off