Having Problems with BF2CC over RCON?

[Spaxx]

Hi guys,

i just wanted to ask, if someone has also problems with the above.

Mainly it is with the maps. As soon, as changes in the mapcycle are made and applied, the Server restarts. This didnt happen with the 1.02 patch of BF2.

Any help would be appreciated

Cheers

Spaxx

[Boffykins]

Is this a multiplay server? Or are you just using ModManager? Does the same fault happen without modmanager? When you say the server restarts, do you mean it quits and restarts, or the map restarts?

[Spaxx]

Hi!

Its a MP Server. The Account is MH3005.

By saying it restarts, i meant, that all player got thrown of the server. That is why I assumed that it quits and restarts.

Basically it worked with 1.02. You could add/delete maps to/from the mapcycle without throwing all people from the server.

Also, by setting the next map to be played or switching to another map directly people get disconnected.

After thinking more about it, this looks like a BF2CC problem. I will see, if I can get some help over there.

However, if you have a clue, please let me know.

Regards

Spaxx

[Brandon [BF2CC]]

Spaxx can you do me a favor and try this client. Let me know if anything changes. I doubt if it will change things since you are most likely using an Rcon connection, but for daemon connections there could have been an incompatibility between the new daemon 2101 and the older 2059 client.

http://www.BF2CC.com/downloads/BF2CC_Client_Beta_1.0.2103.zip

[ApocalypseIV]

Hi, I have another problem, I have downloaded the newest version of the beta 1.0.2103, on running it, I can connect to the server but I get the following error in the logs Unable to Query Server Info - Server is either Starting or Changing Maps. It seems to be connected but no server info like players etc can be seen. The server is running, and I have used earlier versions of BF2CC GUI client before with no worrys.

Any ideas??

Thanks

[Brandon [BF2CC]]

If you aren't seeing any data come back from your server then your rcon is NOT setup correctly, hence the reason why you get no data back.

Check all your network settings, make sure there aren't multiple bf2 servers on that machine interfering with each other.

Originally posted by ApocalypseIV
Hi, I have another problem, I have downloaded the newest version of the beta 1.0.2103, on running it, I can connect to the server but I get the following error in the logs Unable to Query Server Info - Server is either Starting or Changing Maps. It seems to be connected but no server info like players etc can be seen. The server is running, and I have used earlier versions of BF2CC GUI client before with no worrys.

Any ideas??

Thanks

[ApocalypseIV]

Well, I can connect using the 2059 version with everything working, and I used exactly the same settings for the newer version, so Im at a complete loss. I cant actually check if there are multiple servers, as it is run by these guys.

[K]

You sure you entered in the port correctly? I've tested that build here and all seems good. If you check the port and still get no luck post ur MH and I'll try here.

[ApocalypseIV]

Im using the same port number as i used in the last version, but havent had any luck.

MH 2671

Thanks for the help

[K]

Just connected to that server using the client linked above with no problem at all. You must have a typo in your connection details some where.

[ApocalypseIV]

Ok cheers Killing have tried everything, could you tell me what settings that you used, so I can compare them to mine please

[K]

Ip: 85.236.101.10
Port: 16666
Password: <the one listed in your profile>

[Spaxx]

@Brandon

I am using this Beta Client. I havent tried doing anything with the maps yet. I will try tomorrow morning and will let you know by then.

Rgs

Spaxx

[Spaxx]

Looks like, the problem is gone with the Beta Client. Tho, it is not very stable... ;)

Thanks Brandon

Spaxx

[Brandon [BF2CC]]

What's not stable about it, it runs fine for me.

[Spaxx]

It froze sometimes. And the Playerlist suddenly was empty althought it showed a full server.

But, I am glad, that the maplist is working again. ;)

Thx

Spaxx

[Brandon [BF2CC]]

If it freezes when it's minimized to the tray, start it with the -notray parameter.

[pk_bloodlust]

i'm MH3129 and i'm having exactly the same problem as ApocalypseIV. i have tried running the previous version and although i get the error you know about i can see the players and the chat. on the new version (with the same settings) i can't see either and am getting the same error report on the log

http://img.photobucket.com/albums/v493/christales/bf2cc3.jpg

http://img.photobucket.com/albums/v493/christales/bf2cc1.jpg

if you look at the second snapshot you will see i'm connected but no players showing

[Brandon [BF2CC]]

Make sure you are using the correct version of ModManager. The newest version is 1.0a. Also the newest BF2CC client is 1.0.2106. You are having an Rcon problem which could be caused by having multiple bf2 servers running on that same box without being setup properly. Are you running more than 1 bf2 server on that box?

[Boffykins]

He's a Multiplay Clanserver customer

[K]

bf2cc is fine here when connecting to your server pk_bloodlust.
Tested with version 1.0.2103

[Brandon [BF2CC]]

pk_bloodlust:

Make sure you have gone to www.windowsupdate.com and get ALL the updates. Perhaps you are missing the service pack for the .NET framework, or you have 2.0 installed instead of 1.1. You need 1.1 and the service pack for it.

[pk_bloodlust]

i have got the latest version of RM running and i will check for updates to net framework 1.1...will let you know guys

[ApocalypseIV]

Still having the same problem, although, if I restart the server it seems to work for a while untill I close BF2CC then when I open it again it comes up with the Unable to query error again. So Im reverting back to 2059 client as that is the only version that works.

[K]

Originally posted by ApocalypseIV
Still having the same problem, although, if I restart the server it seems to work for a while untill I close BF2CC then when I open it again it comes up with the Unable to query error again. So Im reverting back to 2059 client as that is the only version that works.
If you can come find me in IRC #mpukhosting Apoc I can setup a test server here we can get some info off.

[pk_bloodlust]

i have reformatted my hd and installed all windows updates and it works fine now

[ApocalypseIV]

Hmm didnt want to go down that road really of formatting. Ok Killing when Ive finished my week of night shift, ill try and sort that out cheers.

[ApocalypseIV]

Well I finally gave in, formatted the hd and yes it works fine now, thanx for the help all :)