OK Folks... The difinitive list of kit:

[WhiteKnight]

...Will be posted in this topic when i get a spare half hour to go and do a stock check :eek:

Suffice to say there will be plenty to go around... some new, some as new, and some completely ancient, although most of it fairly good quality stuff. :)

All of it will be "Sold As Seen" unless otherwise stated.

All of it is subject to offers near or around the listed price.

All prices will include free delivery to i7 (or 8)

So, gimme a day or so.. i`ll go through all my stacks of kit i have no need for (and some i do but require money for)
and i`ll post up the results in here, or maybe just a link to it.

If anyone has a need for kit.. feel free to contact me via ICQ and i`ll see what i can do.

ICQ: 14360726

Cheers.

[Thistle]

wiz..i think we need a voting system, like to let people bid for stuff:)

[Big Giant Head]

**** you chris

Any voting system would mean me writing something :(

Godamnit

[jase]

why have a voting system? This will just make things awkard for Stu.

If somebody wishes to sell something and they set the price, Once the price is met, then its sold. And no-one should try to outbid somebody else once the asking price is reached ( Whiteknight !!)

[Avatar261]

i wonder what JAse is on about ????

[Cabe]

if you wanted to bid for stuff, go to Ebay. This is just spare stuff that has no use to its current owner, but may be of use to anone out there.

BTW I got first dibs on any dual processor stuff :)

[WhiteKnight]

Erm cabe... i dont think so some how... That is the stuff i AM using!!

Anyway.. I`m gonna start the stock take now.. should have a list by tomorrow :D

(Jase: sorry mate, just i`m after that sort of kit and everyone else seems to be beating me to it !)

[WhiteKnight]

Ok ladies and germs... punters of all ages... roll up.. roll up..

Here it is (so far... there is more around here somewhere :eek: )

http://www.btinternet.com/~powersoft.pt/forsale.htm

Details marked in RED are unknown
Yellow means i`m unsure.
Blue means reserved.

Feel free to look, and comment..

The page will be updated as and when people make offers.

I KNOW some of the prices may be unreasonable.. but the more unreasonable the price... the less i wanna get rid of the item :D

However saying that, any reasonable offer will be considered.

Enjoy.

[Edited by WhiteKnight on 10th March 2001 at 17:31]

[Phiebs]

Silicon Graphics 20" 13w3 Video connector not 15 pin VGA 25

What you mean VDO Connector - if you can get an adaptor then I'll take that too for £25!!!

AND DEFFO THE
PheeNet Switch 10/100 Mbs 5 RJ45 Also Has Uplink Port 30

ILL TAKE BOTH!!!
MWUAHAHAHAHHAHAHA

[WhiteKnight]

Just to point out that some of these items will only be available if certain other parties produce the goods @ i7..

I.e. that switch is being replaced with a bigger / better one i`m getting from someone else.

But it is a done deal so that should be ok..
There are a few other items tho.. but i`ll notify people as they request them.

[Phiebs]

Could I have a couple more details on the monitor - i.e. how I could connect it to a normal PC - and if it really is £25??

[MONK]

May buy a couple of the HDs and the even pay for the voodoo ;)

[SmartMonkey]

WhiteKnight,
I have your switch here
If you'd like to pop over to Reading you can pick it up now
SmartMonkey

[Jedi180]

i mat have to take that modded full tower case of yer hands, only thing is, WTF is the difference between AT and ATX, coz i have no idea (something to do with cables?) i dunno but i want a full tower case i can mod up so that sounds perfect :D

[WhiteKnight]

Hmm... Portsmouth -> Reading and back ?

Round trip + Toyota MR2 + Lead foot = 25 mins ? heheh

Say 30 for heavy traffic :D

[WhiteKnight]

Jedi: ATX is the size and shape of you motherboard.

If the back of your PC has more than just the keyboard connector (i.e. Keys, Mouse, Serial, Printer and possibly soudn and video) in the same place then the motherboard is an ATX one.

Then you have the PSU standards that normally comply with the motherboad sizes.

But, chances are you`ll have an ATX if you bought it in the last 2-3 years.

[WhiteKnight]

This is the case you`ll get for your £35

http://www.liteonenclosure.com/products/atx600/tt.htm

[Jedi180]

ok wait! first ity was £25 then £30 now £35???, tell ya wot how much would the vanilla full tower cost me?

[WhiteKnight]

Sorry that was a typo. it should have been 35... but i dont know where you get the £30 from ?

But tht price is fixed now..

Its a very nice case (ask TGuyver.. he has one) the non modded one will set u back £30 (if you look at the list) so its up to you..

[y-it-earp]

Are all these things gone yet??

Cos i'll have a monitor
HDD
ATX case
CPU
aand a graphic card off you a.s.a.p.

cheque or whatever :D

lemme know

[WhiteKnight]

ICQ me with your specific requirements.. ( what items you would like off the list provided )

ICQ: 14360726

Cheers

[WhiteKnight]

Ok, good response so far, but still plenty of kit to go around.. come on... buy buy buy.. sale of the century :D

[jase]

Adrian, what size PSU is in that Full tower ?

[zhardoum]

you rang my lord, or did you mean some one else?

[jase]

Oops, Sorry Z, forgot there was 2 of you lot out there :)

I meant WhiteKnight...

I shall be a bit clearer in the future :D

[Thistle]

jase..referring to above...

why have a voting system? This will just make things awkard for Stu.

thats my point dammit!

[jase]

I know mate, but again.. it will only increase the costing of parts offered for sale.

Like the deal that I had with Ava. Ended up costing me an extra tenner, because somebody decided to make an offer after the deal had been sealed.


P.S. Whiteknight. if the Case comes with an ATX PSU, then I will take it off your hands. It will match the one that I currently use. :D

[WhiteKnight]

No the ATX cases dont come with PSUs. sorry.

U still want it ?

[jase]

Erm.. No Thankyou.

Ive already been offerend a case WITH ATX PSU for £30.


So im not going to pay extra for the PSU.

[WhiteKnight]

Ok.. not a problem.. i`m not in a hurry to sell any of this kit. If you dont want it, someone else might.

[Deeeeeee]

I may buy on of those i'll bring the Busted on with me to check for physicall size, it has to fit an Compaq Armmad E500. Could u bring them to i7 m8 plz. What does the case look like (when modded) i'm using one at the Mo un-modded my be intrested it that 2 :D

Cheers

Dee

[Jedi180]

1stly, some of the drill work on my new case U sold is abit poo :P
2ndly, HOW THE HELL DO I GET INTO THE BUGGER?? ive undone 3 screws, but the sides refuse to come off!! i cant get anything into it! damn this infernal machine :D

any info would be good coz the website is no help :(

[WhiteKnight]

1) :( :D and see your other post in the hardware section.

2) Lie it flat on the floor, plastic bezel towards you and just PUSH BACK HARD!!!!

Once you get the mobo and all the other bits in there the case`ll go on / off like a dream. Its just without drives and stuff the case tends to bend a little and makes the side panels stick.



[Edited by WhiteKnight on 4th April 2001 at 15:50]

[Jedi180]

ur a bastard :( im gonna have a wonky ****ing fan grill right on the top of my case:( painting it this weekend though, and borrowing my m8s dremel :D look out for it at i8. U ****ing con man :P

[WhiteKnight]

Sorry, but i did show you the bloody thing before you handed over the cash and you did have a good 24hrs to play with it before you left the event (maybe more) so its your fault if you arent happy with it.

The case doesnt bend that much (only when empty and most full towers do, esp when they are missing bits of metal that were removed to aid ventilation)

Like i said, the holes were in the perfect position for my purposes, but i dont need it any more.

I have stated before:
I do not CON people and i always oporate a 1-1 refund policy.
If you dont like what you get, gimme it back and you can have the money.

BUT !!!

I want it back EXACTLY how i gave it to you !
NO BLEMISHES, SCRATCHES, OR MISSING BITS !

Fair enough ? I think so :)

[Edited by WhiteKnight on 4th April 2001 at 17:01]

[Jedi180]

lol dude i was only joking ok??
i dont mind that much about it. ill find a way roudn it :D

it was cheap NEway, i didnt expect superb quality
glad to say i mnaged to get the sides off after abotu 20 mins of pulling!!!!

NEway cheers for the case ;)