Cisco Config Help

[Nikumba]

I have a Cisco 2621xm router and need to make changes to the config.

What is the easist way to do this?

Cheers

Nikumba

[WhiteKnight]

Console cable + Console Password + Enable Password.

[Nikumba]

Got all those :)

Below is our config got some :show config

The changes I need to do are:

1. dialer0 interface has following commands

compress stac
no ppp multilink interleave
ppp multilink fragment disable
no ppp reliable

2. ensure that following command is deleted for the purpose of testing bonding of the link from FastEthernet0/0

ip access-group 108 in
ip inspect DEFAULT100 in
ip tcp adjust-mss 1452

How do i do that?

Thanks

Noukker#show config
Using 1788 out of 29688 bytes!
hostname Noukker
!
boot-start-marker
boot system flash c2600-ik8o3s-mz.123-10a.bin
boot-end-marker
!
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 51200 debugging
logging console informational
!
clock timezone London 0
clock summer-time London date Mar 30 2003 1:00 Oct 26 2003 2:00
!
ip cef
!
ip subnet-zero
ip name-server 213.208.106.212
ip name-server 213.208.106.213
ip cef
!
!
!
interface FastEthernet0/0
description $FW_INSIDE$$ETH-LAN$
ip address 10.0.0.20 255.255.255.0
ip access-group 108 in
ip inspect DEFAULT100 in
ip tcp adjust-mss 1452
speed auto
half-duplex
no cdp enable
!
interface ATM0/0
no ip address
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
!
interface ATM0/1
no ip address
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
!

interface ATM1/0
no ip address
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
!
interface ATM1/1
no ip address
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
!
interface Dialer0
ip address negotiated
ip accounting output-packets
encapsulation ppp
dialer pool 1
dialer-group 1
dialer persistent
ppp authentication chap callin
ppp chap hostname ******
ppp chap password ******
ppp multilink
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
!
dialer-list 1 protocol ip permit
!
end

[ant]

login to router
enable
config t
int dialer0
compress stac
no ppp multilink interleave
ppp multilink fragment disable
no ppp reliable
int FastEthernet0/0
no ip access-group 108 in
no ip inspect DEFAULT100 in
no ip tcp adjust-mss 1452
exit
exit
copy run start
exit

or something like that